Separate VLAN, got it to show the PS4, but get that error, and nobody on Google knows anything about it.
If using a Edge router, you can find instructions here.
set service bcast-relay id 1 description 'PS4 broadcast' set service bcast-relay id 1 interface eth2.xxxxxx set service bcast-relay id 1 interface eth2.xxxxxx set service bcast-relay id 1 port 987
Those are the commands I used, after installing the broadcast thing. Do you need to broadcast on eth2 itself? Don’t think so, wouldn’t show up on my phone if that was the case. There are firewall rules, to allow my phone and PS4 to communicate. No idea what that error is.
Rebooting router didn’t do anything. Bad idea, forgot something is recording. Can’t see any network traffic from the PS4. Using Wireshark. Did a network test on PS4, now I can see something. It never tries connecting to the PS4’s actual IP.
Added eth2, now my phone can’t find it. It can’t broadcast on eth2, probably doesn’t have an IP.
I’m guessing the App is crap on iOS. Or I need to reboot my phone. Turning WiFi on and off should be enough, but it doesn’t change anything. The router’s firewall isn’t blocking anything.
Same error. To bad Sony doesn’t tell you what the error means.
Doesn’t work on my Moto X4 either, shows it, but I think it gets the same error.