Why is the text on my dishwasher smaller to my camera?

Sitting in my chair, the text looks bigger then zoomed in at 100% on the image of it. I thought cameras could see more then people.

Can I get glasses for my Panasonic lens? If I take my glasses off, I can’t see the text at all. It’s a blurry mess.

18mm could be sharper, but the text is still smaller then what I see.

Funny, the lens is wider in the RAW file.

I tested every aperture from f5.6 to f16. The settings were mostly the same, just increased the flash power for the ones over f8. It doesn’t get sharper after f8, f9 is mostly the same, after f11 it gets worse.

18mm f8

The picture on the fridge isn’t sharp.

You can’t see the aperture on the gallery, the privacy plugin kills all the EXIF info. I looked at the plugin, didn’t see anything that would do that.

Is the text the correct size with my Panasonic 25mm? Or is it 20mm? It’s 25mm.

I use the privacy plugin, so bots can’t guess the filename, and view it. Only if it’s public. I changed the permissions on the folder too.

The picture I took with my phone, is blurry, the text is on the dishwasher. If you zoom in. The text looks darker, not faded like with my camera.

Are you not supposed to use f8 inside?

Why not? Isn’t that what flashes are for? Not sure that’s the sharpest aperture, 32mm f8 is sharp.

Will more light result in less noise? To lazy to search, and I don’t understand anything. That’s why I’m still single.

The answer appears to be yes. I took a picture with a shutter of 30 or something, and then 60 which is what the camera picks. Both f8, also took one at 10 for the shutter speed, 10 is the best. I wouldn’t recommend using the numbers with “, whatever that means. Inches maybe?

Changing the EV compensation might do it too. I’ll just use it in M mode, and set my shutter manually, and keep the aperture at f8. I could of kept my old camera, thanks to the new lens, the camera uses a shitty shutter speed.

That’s on the camera, didn’t look at the pictures on my computer yet. Taking the SD card out is a pain, the grip doesn’t give you much room to grab it. It has an opening, not the official grip. I wouldn’t buy the official one, it’s like $60, and no opening. Rather have a small opening then none. Shouldn’t of trimmed my fingernails. Now it’s even harder to remove the card. Got it out with a key, there’s a little slit or something on the top of the card. If I had fingernails, I could use them. Maybe indent is a better word.

Can I go any slower then 1/10 s? Go to low, and it’ll be blurry. The IBIS won’t make every slow shutter possible.

If you use the really slow speeds with the ” in it, your camera will show a black screen for a long time. I tried getting it do something, I think it finally changed modes, right before I turned it off.

The noise is acceptable at 1/10 s. But none would be ideal. But good luck, lowering the ISO will make it less bright. I’d need a new flash. I think if I buy the same one, I can make it a slave.

Is there a reason my camera picks 1/60 s?

1/10 s
1/60 s

All at ISO 800, click the image, and view the original, and zoom in, look at the dishwasher, the brand is mush on the 1/60 s. The noise by the door is similar on both though. The focus was on the dishwasher.

Is that really noise? Or shutter shock? Almost looks like the same amount of noise on the dishwasher, just blurred on the 1/60 s image. Might be easier to see the noise on a darker image.

To lazy to mess with the anti shock setting. Already put camera away. Maybe in 5+ months I will.

Brilliant, IBIS makes it so you can use cheap lenses at f8. You shouldn’t need to use a Pro lens at f8 inside. Or maybe you would, if you don’t want bokeh.

Panasonic Lumix G Vario 12-32mm f/3.5-5.6 ASPH

Was it advertised as not coming with a rear cap? It has the front cap.

You don’t need a 9mm lens, 12mm is plenty, just back up and you’ll be able to get wide enough pictures. The only good thing about 9mm or less, is you can be closer. I don’t go anywhere that requires being close.

I use it at f5.6. Even at 12mm.

The optical stabilization most likely doesn’t work on Olympus bodies. There’s no switch on the lens. I’d need a Panasonic camera for that. Don’t need it, my camera has IBIS.

If you look at the glass in the rear of the lens, you can see something, not sure if it’s a reflection, or dust, or something else.

It’s probably a kit lens, a pretty good one. Didn’t put the pictures on my computer yet.

You need a powerful flash if you use it indoors, mine is powerful enough.

Might not have bokeh, I’d have to zoom in and get close to find out. It has bokeh, take a picture of your tit to see. That’s how close you have to be.

Oh yeah, to fix the white balance, without using custom ones, turn off the keep warm setting. Saw something about that option on a forum, never noticed it before, it’s under G in the gear icon or whatever.

If using 32mm, you might need to increase the aperture more, that is more then 5.6, not less, 8 > 5.6. You can’t make me think aperture as something else, therefore, 8 is bigger then 5.6.

Noise at ISO 800? Might not be noise, might be “soft”. Who cares, the lens cost $125 or something before tax, it was new pulled from a bundle. You can only see it on the walls, and the table. Take a picture of the dog, and you can’t see whatever it is. If it’s soft, turning it down more might help.

Here’s a picture for the ladies.

Neat Image removes detail. Might as well use the noise reduction in digiKam.

It’ll cost $6 for a rear Panasonic lens cap. Will my other lenses rear caps fit on it? Just leave one lens on the camera at all times, like I do.